Circle Seal SV464T Solenoid Valve
SV460 Series: Vacuum to 6000 psig
Features:
- Zero leakage
- Bi-directional flow
- Versatile: available in 3-way/2-position, 2-way normally-closed and 2-way normally-open configurations
- Balanced poppet design
- 303SS or Brass construction
- Minimum current required
- Rapid response
- Explosion-proof per MIL-STD-810B
- High pressure
- Direct acting
- Medium flow capacity
How it Works:
3-way, 2-position, Normally-Closed
- Balanced Poppet Design: The solenoid valve utilizes a design that employs a single poppet, two pressurized sliding seals, and two main valve seats. The seals and the two seats (which the poppet seals against) have the same diameter. The pressure forces are always balanced regardless of poppet position. The only new force acting on the poppet is the poppet return spring or the forces exerted on the armature by the magnet coil.
- The De-energized Position: With the valve in a de-energized position and pressure applied to Port B, the valve operates as a 3-way, 2-position, normally-closed valve. In this position a flow pattern from Port A to Port C is established. Pressure can be applied to either port. The forces affecting the poppet are on the normally-closed seat resulting from the poppet return spring.
- Energized Position: With pressure applied to Port B and electrical energy applied to the coil, the armature is drawn up against the coil compressing the armature return spring, and pulling the poppet up tight against the normally-open seat of the valve. In this condition, a flow pattern between Port B and Port C is established and Port A is isolated. When the valve is de-energized, the poppet return spring forces the poppet to return to the normally closed seat and reestablishes a flow pattern between Port C and Port A with Port B being closed.
3-Way, 2-Position, Normally-Open
- In this configuration, pressure is applied to Port A rather than to Port B with the valve de-energized. Pressure is connected to Port C. When the valve is energized Port A is closed and Port C is connected to Port B.
2-Way, 2-Position Valves (Normally-Closed or Normally-Open)
- Any of the three ported valves may be converted to a two-way operation by plugging Port A or B. Plugging Port A provides a 2-way, normally-closed valve. Plugging Port B provides a 2-way, normally-open valve. 2-way, normally-open or normally-closed valves (with only 2 ports) are also available.
Selector Valve
- The 3-way, 2-position valves can also be used as selector valves by connecting two separate pressure sources to Ports A and B and then selectively running them to Port C, depending on whether the valve is energized or de-energized. A single fluid source connected to Port C may also be diverted to Ports A or B selectively.
Circle Seal SV464T Solenoid Valve Technical Data:
- Description: SV460-Series Solenoid Valve with a 115VDC coil, constructed in 303SS rated up to 6000 psig
- Coil Voltage: 115VDC
- Max. Pressure Rating: 6000 psig
- Body Material: 303SS
- Electrical Connection: MS3102-10SL-4P electrical connector
- Temperature Range: -65F to +165F
- Leakage: Bubble-Tight internal & external
- Cv: 0.64
Dimensional Information:
Options:
To include any of the following options on a standard valve, add the following suffix to the end of the valve part number:
- “D”: DIN 43650 electrical connector, furnished complete (not available with “E” option)
- “E”: 1/2″ NPT conduit connection & 36″ connector leads (DC valves only: this is standard on AC valves)
- “M”: manual override (not available with electrical position indicator option)
- “S”: electrical position indicator (not available with manual override option)
Notes:
- Proper filtration is recommended to prevent damage to sealing surfaces.
- Standard connections are FNPT, but female tube (AND10050) connections are available as an option; contact Sales Department for assistance.
Please contact our Sales Department for assistance in selecting the right products for your application.
Product Catalog: Circle Seal Solenoid Valves
