Autoclave CNLX1206-316 Nipple
Medium Pressure Cone & Thread, Pressures to 20,000 psi
For rapid system make-up, Parker Autoclave Engineers supplies pre-cut coned-and-threaded nipples in various sizes and lengths for Parker Autoclave Engineers medium pressure valves and fittings.
Autoclave CNLX1206-316 Nipple Technical Data:
- Description: 3/4″ OD x 6.00″ Long Nipple
- Tubing OD: 3/4″
- Connection Type: SF750CX
- Pressure Rating: 15,000 psi
- Tubing ID: 0.516″”
- Material: 316SS
- Length: 6.00″
Notes:
- Material: standard nipples manufactured in accordance with ASME B31.3 Chapter IX standards using UNS S31600/S31603, 316/316L Stainless Steel material, cold worked to Parker Autoclave proprietary standards. Optional materials available, including type 304 stainless steel.
- Special Lengths: in addition to the standard lengths available, nipples are available in any custom length.
- Medium Pressure Tubing outside diameter dimensions do not meet standard commercial tubing tolerances. Tubing outside dimensions are specifically chosen to meet tube threading die requirements.
- Caution must be exercised when selecting medium pressure nipples since some sizes are available with two different ID measurements which have different pressure ratings.
- Parker Autoclave Engineers components and tubing are designed as a “complete system” for safety and our fittings will not be compatible with standard “commercial” tubing.
- The maximum pressure rating of any system is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower.
Please contact our Sales Department for assistance in selecting the right products for your application.
Product Catalog: Parker Autoclave Medium Pressure Fittings & Tubing
