Autoclave CB6601 Ball Check Valve
High Pressure Cone & Thread, Pressures to 60,000 psi
Prevent reverse flow where leak-tight shutoff is not mandatory. When differential pressure drops below the cracking pressure, the valve closes. With all-metal components, the valve can be used up to 800F. NOT FOR USE AS RELIEF VALVE.
Autoclave CB6601 Ball Check Valve Technical Data:
- Description: 3/8″ High Pressure Ball Check Valve
- Size: 3/8″
- Connection Type: F375C
- Pressure Rating: 60,000 psi
- Orifice Diameter: 0.125″
- Cv: 0.28
- Hex Size: 1.18″
- Length: 3.75″
- Temperature: With all-metal components, valve can be used up to 800F. Minimum standard operating temperature is -110F. For low temperature operation to -423F, use suffix “-LT” (low temp spring).
- Cracking Pressure: 20 psi, +/- 30%. No optional cracking pressures available.
- Installation: Vertical or horizontal as required. Flow direction arrow marked on valve body.
- Repair Kit: Check valves are easily repaired. Add “R” to front of valve part number for corresponding repair kit. See “Cover Torque” value for re-assembly.
- Cover Torque: 110 ft-lbs.
Please contact our Sales Department for assistance in selecting the right products for your application.
Product Catalog: Parker Autoclave High Pressure Fittings & Tubing
