DIRECT LIFT SOLENOID VALVES

Atkomatic direct lift solenoid valves are used where small flows are needed. The magnetic pull of the coil opens the internal orifice directly by lifting the plunger assembly off the valve seat. Since these valves depend entirely upon the magnetic power of the solenoid for operation, the higher the pressure differential, the smaller the internal orifice must be. The orifice size available also depends on the viscosity of the fluid and the voltage requirements.

Some typical applications include:

• Direct injection of an additive to a process
• Air ejection of a part from a mold or die
• High pressure cleaning of a small surface area
• Small vacuum systems

These valves operation from zero to a maximum specified operating pressure.

NOTE: these direct lift solenoid valves must be mounted in a horizontal pipeline, with the coil oriented vertically over the pipe centerline, in order to operate correctly.

 

DIRECT LIFT SOLENOID VALVES OVERVIEW

For assistance with or additional information on any of these products, please contact sa***@fl*****************.com .