8″ & 14″ AGT Series (Two-Stage) Gas Boosters

8″ and 14″ AGT Series Two-stage gas boosters provide efficient means of boosting to a high gas compression ratio since he ratio per stage is low.

Maximum outlet pressure = drive area ratio X air drive pressure + gas supply pressure X the area ratio of the two gas pistons.

General Specifications:

• Min Air Drive Pressure: 20 psig
• Max Air Drive Pressure: 130 psig (except AGD-1.5 = 130 psig
• Max Cycling Speed: 50 cycles / minute (8″ models); 40 cycles / minute (14″ model)

Connections:

• Air inlet: 3/4″ FNPT
• Gas inlet: 1/4″ FNPT to 1/2″ FNPT or 3/8″ HP (depending on model)
• Gas outlet: 1/4″ FNPT or 1/4″ HP to 3/8″ HP (depending on model)

8″ and 14″ AGT Series Model Section Chart

Notes:

1. Supply pressure also limited by factor X air drive (Pa) to avoid interstage stall.
2. If outlet pressure exceeds Maximum 1st Stage pressure and supply pressure simultaneously exceeds pressure limit above the line, install interstage relief valve set at this pressure.

The gas boosters listed above are designed for inert gases. For Hydrogen or Oxygen applications, or for complete systems, see the chart below:

For more detailed information on any of the models listed above, such as performance flow curves, dimensional information, etc., please see their individual product pages under the “shop” section.

For assistance with or additional information on any of these products, please contact sa***@fl*****************.com.