AG Series (Single-Acting/Single-Stage) Gas Boosters

AG Series Single-Acting / Single-Stage gas boosters provide economical means of boosting pressure for testing or small components and similar applications where volume is small and efficiency is not important. Control of maximum outlet pressure is accomplished with the use of an air drive pressure regulator. Maximum outlet pressure = drive area ratio X air pressure.

General Specifications:

• Min Air Drive Pressure: 20 psig
• Max Air Drive Pressure: 150 psig (except AG-233 & AG-303 = 130 psig
• Max Cycling Speed: 60 cycles / minute

Connections:

• Air inlet: 1/2″ FNPT
• Gas inlet: 3/8″ FNPT, 3/8″ SAE or 1/4″ HP (depending on model)
• Gas outlet: 3/8″ FNPT, 3/8″ SAE or 1/4″ HP (depending on model)

AG Series Model Section Chart

The gas boosters listed above are designed for inert gases. For Hydrogen or Oxygen applications, or for complete systems, see the chart below:

For more detailed information on any of the models listed above, such as performance flow curves, dimensional information, etc., please see their individual product pages under the “shop” section.

For assistance with or additional information on any of these products, please contact sa***@fl*****************.com.