AGD Series (Double-Acting/Single-Stage) Gas Boosters

AGD Series Double-Acting / Single-Stage gas boosters not only pump twice the volume of a single-acting/single-stage booster per cycle, but also require less air drive since the inlet gas pressure is assisting the air drive in each direction, providing a substantial portion of the required driving force. These models provide efficient means of boosting large volumes of gas at low to medium compression ratios.

Maximum outlet pressure = drive area ratio X air drive pressure + gas supply pressure.

General Specifications:

• Min Air Drive Pressure: 20 psig
• Max Air Drive Pressure: 150 psig (except AGD-1.5 = 130 psig
• Max Cycling Speed: 60 cycles / minute

Connections:

• Air inlet: 1/2″ FNPT
• Gas inlet: 3/8″ FNPT to 3/4″ FNPT, 3/8″ SAE or 1/4″ HP (depending on model)
• Gas outlet: 3/8″ FNPT to 1/2″ FNPT, 3/8″ SAE or 1/4″ HP (depending on model)

AGD Series Model Section Chart

The gas boosters listed above are designed for inert gases. For Hydrogen or Oxygen applications, or for complete systems, see the chart below:

For more detailed information on any of the models listed above, such as performance flow curves, dimensional information, etc., please see their individual product pages under the “shop” section.

For assistance with or additional information on any of these products, please contact sa***@fl*****************.com.