1.5HP LIQUID PUMPS OVERVIEW
Haskel 1.5HP Liquid Pumps are designed to provide a safe, reliable and economical, source of hydraulic pressure.
Key Features:
- Choice of 10 models, 13 ratios, 50 possible combinations
- Flows to 22 GPM
- Choice of wetted materials
- Single air head
- Air drive pressure 3 to 150 psi
- Output pressures to 50,000 psi (outlet pressure = air drive pressure x pump pressure ratio)
- Max cycle rate = 60 cycles per minute
Connections:
- Air inlet: 1/2″ FNPT
- Liquid inlet: one or two 1/2″ FNPT or one 1″ FNPT (depending on model)
- Liquid outlet: 1/4″ HP female or 1/2″ to 1″ FNPT (depending on model)
1.5HP Liquid Pumps Model Selection Chart
Service
Codes
Pump
Section
Plunger
Non-Metallics
Pressure Ratios
AW
1
Nickel-plated Steel & Stainless Steel
440C SS
Urethane, Buna-N, PTFE
DF
1,3,5
Separation – Nickel-plated steel & SS
440C SS
UHMWPE, Viton, PTFE, Ryton
DSF
1,2,3,5,6
All Stainless Steel w/separation
Hard chrome-plated 440C SS
UHMWPE, Viton, PTFE, Ryton
DSTV
1,2,3,4,5
All Stainless Steel w/separation
Hard chrome-plated 440C SS
PTFE, Viton
Service Codes Breakdown:
- Petroleum-based oils, kerosene, ethylene glycol, water with 5% soluble oil.
- Plain water, diesel fuel.
- Most phosphate ester-based hydraulic fire-resistant hydraulic fluids.
- Petroleum-based solvents.
- Skydrol and Aerosafe hydraulic acetone and some alcohols.
- Deionized water; demineralized water.
For assistance with or additional information on any of these products, please contact sa***@fl*****************.com.