6HP LIQUID PUMPS OVERVIEW
Haskel 6HP Liquid Pumps are designed to provide a safe, reliable and economical, source of hydraulic pressure.
Key Features:
- Choice of 10 models, 4 ratios, 20 possible combinations
- Flows to 21 GPM
- Choice of wetted materials
- Double-acting single air head
- Air drive pressure 3 to 125 psi
- Output pressures to 10,000 psi (outlet pressure = air drive pressure x pump pressure ratio)
- All hydraulic fluids, water (plain or DI), solvents
- Max cycle rate = 40 cycles per minute
Connections:
- Air inlet: 3/4″ FNPT
- Liquid inlet: one or two 1-1/4″ FNPT (depending on model)
- Liquid outlet: one 1/2″ FNPT or two 3/4″ FNPT (depending on model)
6HP Liquid Pumps Model Selection Chart
Service
Codes
Pump
Section
Plunger
Non-Metallics
Pressure Ratios
GSF
1,2
All Stainless Steel & Bronze
Hard chrome-plated 15-5PH SS
UHMWPE, Viton, PTFE, Ryton
DGF
1,3,5
Nickel-plated Steel & SS w/separation
Hard chrome-plated 15-5PH SS
UHMWPE, Viton, PTFE, Ryton
DGSF
1,2,3,5,6
All SS & Bronze w/separation
Hard chrome-plated 15-5PH SS
UHMWPE, Viton, PTFE, Ryton
DGSTV
1,2,3,4,5
All SS & Bronze w/separation
Hard chrome-plated 15-5PH SS
Viton, PTFE, Ryton
GSFD
1,2
All Stainless Steel & Bronze
15-5PH SS (hard chrome-plate optional)
UHMWPE, Buna-N, PTFE, Ryton
DGFD
1,3,5
Nickel-plated Steel & SS w/separation
15-5PH SS (hard chrome-plate optional)
UHMWPE, Viton, PTFE, Ryton
DGSFD
1,2,3,4,5,6
All SS & Bronze w/separation
15-5PH SS (hard chrome-plate optional)
UHMWPE, Viton, PTFE, Ryton
Service Codes Breakdown:
- Petroleum-based oils, kerosene, ethylene glycol, water with 5% soluble oil.
- Plain water, diesel fuel.
- Most phosphate ester-based hydraulic fire-resistant hydraulic fluids.
- Petroleum-based solvents.
- Skydrol and Aerosafe hydraulic acetone and some alcohols.
- Deionized water; demineralized water.
For assistance with or additional information on any of these products, please contact sa***@fl*****************.com.