Large Parker Autoclave logo

TUBING

Parker Autoclave Engineers offers a complete selection of Austenitic, cold-drawn stainless steel tubing designed to match the performance standards of Parker Autoclave Engineers valves and fittings. Parker Autoclave Engineers tubing is manufactured specifically for low, medium, and high pressure applications requiring both strength and corrosion resistance. All tubing is supplied in random lengths between 20 and 26 feet long.

Parker Autoclave Engineers tubing is inspected to assure it will be free of seams, laps, fissures, or other flaws, as well as carburization or intergranular carbide precipitation. The outside and inside diameters of the tubing are subject to special inspection and are controlled within close tolerances to assure proper fit. Sample pieces of tube for each lot are tested to confirm mechanical properties. Hydrostatic testing is also performed on a statistical basis and is conducted at the working pressure of the tube. Parker Autoclave Engineers will perform 100% hydrostatic testing or autofrettage for high cyclic applications (at additional cost) if required.

TUBING OVERVIEW

 

Series

Working

Pressure

 

Sizes

Connection

Type

 

Materials

Temperature

Range

Low Pressure
0 – 15,000 psig
1/16″ OD to 1/2″ OD
“SpeedBite”
(single-ferrule compression)
UNS S316/S31603 type 316/316L SS
-100F to +650F
Parker Autoclave low pressure tubing
Parker Autoclave low pressure fittings features
Medium Pressure
0 – 20,000 psig
1/4″ OD to 1-1/2″ OD“
“Medium Pressure”
(coned-and-threaded)
UNS S31600/S31603 type 316/316L SS
(cold worked)
-423F to +600F
(see technical info for temp ratings over 600F)
Parker Autoclave medium pressure tubing
Parker Autoclave medium pressure connections make-up
Parker Autoclave medium pressure fittings features
High Pressure
0 – 60,000 psig
1/4″ OD to 1″ OD
“High Presssure”
(coned-and-threaded)
UNS S31600/S31603 type 316/316L SS
UNS S30400/S30403 type 304/304L SS
-423F to +600F
(see technical info for temp ratings over 600F)
Parker Autoclave high pressure tubing
Parker Autoclave high pressure connection make-up
Parker Autoclave high pressure fittings features
Ultra High Pressure
0 – 150,000 psig
1/4″ OD to 9/16″ OD
“High Presssure”
(coned-and-threaded)
UNS S31600/S31603 type 316/316L SS
HP160
-100F to +600F
Parker Autoclave ultra high pressure tubing
Parker Autoclave ultra high pressure connection make-up
Parker Autoclave ultra high pressure fittings features

CONED-AND-THREADED NIPPLES

For rapid system make-up, Parker Autoclave Engineers supplies pre-cut, coned-and-threaded nipples in various sizes and lengths for Parker Autoclave Engineers Medium and High Pressure valves and fittings.

In addition to the standard lengths listed below, nipples are also available in any custom length up to total stick length.

NIPPLES OVERVIEW

 

Series

Working

Pressure

 

Sizes

Connection

Type

 

Materials

Lengths

Available

Medium Pressure
0 – 20,000 psig
1/4″ OD to 1-1/2″ OD“
“Medium Pressure”
(coned-and-threaded)
UNS S31600/S31603 type 316/316L SS
2.75″ to 24″
Parker Autoclave medium pressure nipples
High Pressure
0 – 60,000 psig
1/4″ OD to 1″ OD
“High Presssure”
(coned-and-threaded)
UNS S31600/S31603 type 316/316L SS
2.75″ to 24″
Parker Autoclave high pressure nipples
Ultra High Pressure
0 – 150,000 psig
1/4″ OD to 9/16″ OD
“Ultra High Presssure”
(coned-and-threaded)
UNS S31600/S31603 type 316/316L SS
4″ to 24″
Parker Autoclave ultra high pressure nipples

For assistance with or additional information on any of these products, please contact sa***@fl*****************.com.