Autoclave 201D-0595 Reamer Handle Assembly

Autoclave 201D-0595 Reamer Handle Assembly

Reseating Tool, for female TUBING CONNECTION cone seat

Procedure:

1. Clamp fitting in soft-jawed vise.
2. Thread gland nut into connection and tighten to 10 ft-lbs.
3. Apply a medium weight high sulfur cutting oil generously through opening in nut. Cutting oil P-8784.
4. Insert reamer through guide bushing and press down firmly while rotating clockwise approximately two full turns, relieving pressure gradually toward end of second turn.
5. Remove reamer, guide nut and bushing and inspect cone seat.
6. Repeat steps 2,3,4 and 5, if necessary, until cone surface has been restored and finish is smooth.
7. Clean fitting thoroughly to remove all chips and residue.

Autoclave 201D-0595 Reamer Handle Assembly Technical Data:

• Description: Reamer Handle Assembly for 3/4″ & 1″ Medium & High Pressure Connections
• Connection Size(s) & Type(s): 3/4″ Medium Pressure & 1″ Medium & High Pressure (SF750CX, SF1000CX, F1000C43)

Please contact our Sales Department for assistance in selecting the right products for your application.

 Product Catalog: Parker Autoclave Tools