Autoclave CPB8800 Ball Check Valve
NPT Threaded, pressures to 15,000 psi
Prevent reverse flow where leak-tight shut-off is not mandatory. When differential pressure drops below cracking pressure, valve closes. With all-metal components, valve can be used up to 650F. NOT FOR USE AS RELIEF VALVE.
Autoclave CPB8800 Ball Check Valve Technical Data:
- Description: 1/2″ FNPT Ball Check Valve
- Connection Type: 1/2″ FNPT
- Pressure Rating: 15,000 psi
- Orifice Diameter: 0.36″
- Cv: 2.30
- Cover torque: 140 ft-lbs
- Dimension “A”: 5.36″
- Dimension “B”: 3.88″
- Dimension “C”: 1.38″ (HEX)
- Dimension “D”: 1.19″ (HEX)
- Temperature: Minimum operating temperature for standard ball check valve is is 0F. For low temperature options to -100F, add suffix -LT to valve part number (low temperature spring).
- Cracking pressure: 20 psi, +/- 30%. Optional cracking pressures NOT available in Ball-Type check valves.
- Installation: Vertical or horizontal as required. Flow direction arrow marked on valve body.
- Repair Kit: Check valves are easily repaired. Add “R” to front of valve part number for corresponding repair kit.
Notes:
- All dimensions for reference only and subject to change.
- NPT threads must be sealed using a high quality PTFE tape and/or paste product. Refer to thread sealant manufacturer’s instructions on how to apply thread sealant.
- Sealing performance may vary based on many factors such as pressure, temperature, media, thread quality, thread material, proper thread engagement and proper use of thread sealant.
- Customer should limit the number of times an NPT fitting is assembled and disassembled because thread deformation during assembly will result in deteriorating seal quality over time. When using only PTFE tape, consider using thread lubrication to prevent galling of mating parts.
- Maximum pressure rating is based on the lowest rating of any component.
Please contact our Sales Department for assistance in selecting the right products for your application.
Product Catalog: Parker Autoclave Instrument Pipe Fittings & Tubing
