Autoclave P-0270 Reamer Only

Autoclave P-0270 Reamer Only

Reseating Tool, for female TUBING CONNECTION cone seat

Procedure:

1. Clamp fitting in soft-jawed vise.
2. Thread gland nut into connection and tighten to 10 ft-lbs.
3. Apply a medium weight high sulfur cutting oil generously through opening in nut. Cutting oil P-8784.
4. Insert reamer through guide bushing and press down firmly while rotating clockwise approximately two full turns, relieving pressure gradually toward end of second turn.
5. Remove reamer, guide nut and bushing and inspect cone seat.
6. Repeat steps 2,3,4 and 5, if necessary, until cone surface has been restored and finish is smooth.
7. Clean fitting thoroughly to remove all chips and residue.

Autoclave P-0270 Reamer Only Technical Data:

• Description: Reamer Only for 1/4″ Medium & High Pressure Connections
• Connection Size(s) & Type(s): 1/4″ Medium & High Pressure (SF250CX & F250C)

Please contact our Sales Department for assistance in selecting the right products for your application.

 Product Catalog: Parker Autoclave Tools