Autoclave SWB8800 Ball Check Valve
Low Pressure “Speedbite”, Single Ferrule to 15,000 psi
Prevent reverse flow where leak-tight shut-off is not mandatory. When differential pressure drops below cracking pressure, valve closes. With all-metal components, valve can be used up to 650F. NOT FOR USE AS RELIEF VALVE.
Autoclave SWB8800 Ball Check Valve Technical Data:
- Description: 1/2″ Low Pressure Ball Check Valve
- Size: 1/2″
- Connection Type: SW500
- Pressure Rating: 10,000 psi
- Orifice Diameter: 0.375″
- Cv: 3.40
- Hex Size: 1.38″
- Length: 4.18″
- Temperature: Minimum operating temperature for standard ball check valve is is 0F. For low temperature options to -100F, add suffix -LT to valve part number (low temperature spring).
- Cracking pressure: 20 psi, +/- 30%. Optional cracking pressures NOT available in Ball-Type check valves.
- Installation: Vertical or horizontal as required. Flow direction arrow marked on valve body.
- Repair Kit: Check valves are easily repaired. Add “R” to front of valve part number for corresponding repair kit.
Please contact our Sales Department for assistance in selecting the right products for your application.
Product Catalog: Parker Autoclave Low Pressure Fittings & Tubing
