Autoclave SWK6602 Ball-Type Excess Flow Valve
Low Pressure “Speedbite”, Single Ferrule to 15,000 psi
Protects pressure gauges and pressure instrumentation from sudden surges in flow or venting in the event of line failure.
Autoclave SWK6602 Ball-Type Excess Flow Valve Technical Data:
- Description: 3/8″ Low Pressure Ball-Type Excess Flow Valve
- Size: 3/8″
- Connection Type: SW375
- Pressure Rating: 15,000 psi
- Orifice Diameter: 0.250″
- Cv: 0.104 (check flow, water – GPM)
- Hex Size: 1.00″
- Length: 3.56″
- Temperature: Operating temperature range for standard ball-type excess flow valves is -100F to +650F.
- Resetting valve: Equalize the pressure across the ball. The ball will drop and reset automatically.
- Installation: Since this type of check valve employs a non-spring loaded ball, the valve MUST be installed in a VERTICAL position with the arrow on the valve body pointing UP.
- Repair Kit: Excess flow valves are easily repaired. Add “R” to front of valve part number for corresponding repair kit.
Please contact our Sales Department for assistance in selecting the right products for your application.
Product Catalog: Parker Autoclave Low Pressure Fittings & Tubing
