Haskel 59933 Gas Booster System
Features & Benefits:
- Plumbed for inert gases in single arrangements
- Supplied with a range of controls: air controls, air pilot switches (optional) for automated stop/start control, relief device, pressure isolation and vent valves
- All components are mounted and plumbed in an open stainless steel frame with a sloped front panel
- Safety relief devices are standard on all gas booster systems for maximum operational safety
- Allows 90 to 95% use of cylinder gas to maintain process pressure when cylinder pressure drops
- Can charge a receiver to even higher pressure level, thus storing a volume of gas for rapid release
Applications:
- Gas accumulator charging
- Pressure & leak testing various pressure containing components
- Pressurization of gas cylinders
- Gas transfer, boosting or mixing
Standard System Components:
- Air-driven gas booster with external pilot modification to enable use of external air pilot switches to automatically start and stop the booster.
- Speed control valve.
- Air filter.
- Adjustable regulator to control air drive pressure.
- Air drive pressure gauge, 0-160 psig.
- Adjustable air pilot switch used to stop booster when the gas supply pressure falls below the adjusted minimum set point (20 psi).
- Adjustable remote-set outlet air pilot switch used to stop the booster when the outlet pressure reaches the adjusted maximum set point (280 psi).
- Inlet & Outlet pressure gauges, 0-1000 psi, safe case design, 100mm diameter, panel mounted with bar/psi dual scale. Accuracy +/- 1% FSD.
- Inlet & Outlet gas filters, 5-micron rated, used to stop any ingested contamination from entering the booster (e.g. while changing out gas bottles) and to stop and contamination from exiting the booster.
- Roll bar frame with sloping operator panel into which the booster and controls are mounted. Frames are brushed 316 stainless steel.
- Adjustable Haskel relief valve (set at 300 psi) used to protect the booster and other components from over pressurization, piped to a common vent connection.
Technical Data:
- Description: AGD-4 Gas Booster System
- Drive Size: 5.25″
- Stage 1 Ratio: 4:1
- Stage 2 Ratio: N/A
- Min GAS supply pressure: ATM
- Max GAS supply pressure: 1250 psi
- Max rated GAS outlet pressure: 1250 psi
- Static outlet stall pressure formula: 4 Pa + Ps (Pa = air drive pressure; Ps = gas supply pressure)
- Min AIR drive pressure: 20 psi
- Max AIR drive pressure: 150 psi
- Inter-stage relief valve set pressure: N/A
Sample Performance Characteristics:
- Boost 4.5 SCFM Gas from 50 psi to 200 psi while using 30 SCFM Air @ 90 psig supply pressure
- Boost 16 SCFM Gas from 200 psi to 400 psi while using 30 SCFM Air @ 90 psig supply pressure
- Boost 25.4 SCFM Gas from 350 psi to 600 psi while using 30 SCFM Air @ 90 psig supply pressure
Physical Characteristics:
- Displacement / cycle: 19.3 cu. in.
- Max cycles: 60/min.
- GAS inlet/outlet connections: 1/4″ FNPT
- AIR drive inlet port: 1/2″ FNPT
Haskel 59933 Gas Booster System Repair kit information:
- Gas section seal kit P/N: 29013
- Air drive section seal kit P/N: 16772
- Air valve seal kit P/N: 16771
- Check valves seal kit P/N: N/A
- Distance piece kit P/N: 17327
- Optional tools: 28584 (Sleeve Removal Tool); 56198 (Bullet Tool for installing piston rod thru rod seals)
- Notes: 29013 Gas Section kit includes piston & check valve seals.
To add any modifications to this booster system or for assistance in selecting the right booster system for your application, please contact our Sales Department.
Product Catalog: Gas Booster Systems Brochure
Product Catalog: Gas Booster Catalog
