Autoclave CN44018-316 Nipple
High Pressure Cone & Thread, Pressures to 60,000 psi
For rapid system make-up, Parker Autoclave Engineers supplies pre-cut coned-and-threaded nipples in various sizes and lengths for Parker Autoclave Engineers high pressure valves and fittings.
Autoclave CN44018-316 Nipple Technical Data:
- Description: 1/4″ OD x 18.00″ Long Nipple
- Tubing OD: 1/4″
- Connection Type: F250C
- Pressure Rating: 60,000 psi
- Tubing ID: 0.083″”
- Material: 316SS
- Length: 18.00″
Notes:
- Material: standard tubing manufactured in accordance with ASME B31.3 Chapter IX standards using UNS S31600/S31603, 316/316L Stainless Steel material, cold worked to Parker Autoclave proprietary standards. Optional materials available, including type 304 stainless steel.
- Special Lengths: in addition to the standard lengths available, nipples are available in any custom length.
- High Pressure Tubing outside diameter dimensions do not meet standard commercial tubing tolerances. Tubing outside dimensions are specifically chosen to meet tube threading die requirements.
- Parker Autoclave Engineers components and tubing are designed as a “complete system” for safety and our fittings will not be compatible with standard “commercial” tubing.
- The maximum pressure rating of any system is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower.
- Type “40CNxx” nipples use the larger bore (0.250″ ID) 9/16″ OD tubing rated at 40,000 psig with standard high pressure collares and gland nuts.
Please contact our Sales Department for assistance in selecting the right products for your application.
Product Catalog: Parker Autoclave High Pressure Fittings & Tubing