Atkomatic 6000 Solenoid Valve
6000 Series: Bronze, Pilot-Piston, Pressure 5 to 1500 psig
Medium Pressure Valve Configurable for a Variety of Fluid Applications
6000 Series Valve Features:
- Pressures to 1500 psig
- Pilot operated: requires a minimum pressure differential of 5 psig
- Full ported valves
- Fluid temperatures from -423F to +500F
- For use with any gas or liquid (max. viscosity of 200 SSU), including steam and cryogenics, that is not harmful to bronze
- Pipe sizes of 1/4˝ through 1-1/2˝ NPT
- Cv from 1.4 to 21
- Available in normally-open and normally-closed versions
- Optional pilot & piston seat materials of PTFE, PCTFE, Buna-N, Viton, EPR, or metal (316 stainless steel pilot and/or brass piston seat) depending on fluid type and pressure
- Body seal materials of PTFE, Viton, Buna-N, or EPR
- Bronze valve material (naval M Bronze)
- Removable 316 stainless steel body inserts (stainless steel trim)
- Coil housings available in NEMA 1 (standard), NEMA 4 (waterproof), NEMA 7 (explosion-proof for hazardous locations), and combination NEMA 4 & 7
- Manual opening, throttling device or electrical valve position indicator are available as options
- Class B coils are available for media temperatures of 0F through +220F
- Class H coils are available for media temperatures of -423F through +500F
- Treated 416 stainless steel plunger material for increased corrosion resistance
Atkomatic 6000 Solenoid Valve Technical Data:
- Description: 1/4″ FNPT 2-Way/Normally-Closed Pilot-Operated Solenoid Valve, constructed in Bronze rated up to 1500 psig
- Configuration: 2-Way/Normally-Closed
- Connections: 1/4″ FNPT
- Electrical Connection: 1/2″ NPT conduit with 36″ pigtail leads
- Max. Pressure Rating: 1500 psig
- Operating Pressures:
- Gas: 5-1500 psig (AC or DC coils)
- Water: 5-1500 psig (with AC coil) OR 5-1000 psig (with DC coil)
- Light Oil: 5-1200 psig (with AC coil) OR 5-600 psig (with DC coil)
- Steam: 5-200 psig
- Cryogenic: 5-1500 psig (with AC coil) OR 5-1000 psig (with DC coil)
- Body Material: Bronze
Options:
- Operating Pressure: additional (lower) operating pressure options are available, as shown above in the “How to Order” graphic
- Seat/Pilot/Seal Materials: additional seat/pilot/seal material options are available (such as EPR, PCTFE, metal), as shown above in the “How to Order” graphic
- Valve Modifications:
- Manual Throttling (“T” suffix): allows restriction of flow through the valve by reducing the area of the main valve orifice
- Manual Opening (“M” suffix): allows manual opening of the valve in the even of electrical failure
- Position Indicator (“P” suffix): electrical switches that show both the valve open and closed positions for connection to an external control system
Notes:
- Unless otherwise noted, all Atkomatic solenoid valves are designed for installation in a horizontal pipeline with the coil oriented vertically over the pipe center line.
- It is important to locate filters immediately upstream of the valves (with a maximum micron rating of 40 microns) to prevent contamination in the system from causing functional problems with the valves.
- When selecting the product options, if no results are returned the combination is invalid and other selections will need to be made. For example, Steam and Cryogenic applications require Class H coils and TFE or metal seats because of the temperature requirements.
- Contact the Sales Department for replacement coil part numbers and / or repair kit information.
Please contact our Sales Department for assistance in selecting the right products for your application.
Product Catalog: Atkomatic “6000” Series Solenoid Valves
Product Manual: Atkomatic “6000” Series Normally-Closed Solenoid Valves Manual
Complete Atkomatic Catalog: Atkomatic Solenoid Valves Catalog
Complete Atkomatic Technical Manual: Atkomatic Technical Manual
