Atkomatic 31570 Solenoid Valve
30400 Series: Bronze, Semi-Direct Lift, Pressure 0 to 1500 psig
Medium Pressure Valve Configurable for a Variety of Fluid Applications
30400 Series Valve Features:
- Semi-direct lift action for operation down to zero pressure differential
- Operating pressures to 1500 psig
- Fluid temperatures from -423F to +500F
- Will handle fluids with viscosity up to 150 SUS
- Bronze valve material (naval M Bronze)
- Suitable for use with a wide variety of fluids, including air, gases, hydraulic fluids, steam, cryogenic fluids and fluids not harmful to bronze
- Heaviest duty and most rugged construction
- Optional seat materials of PTFE, PCTFE, Buna-N, Viton, EPR, or metal (316 stainless steel pilot and/or brass piston seat) depending on fluid type and pressure
- Body seal materials of PTFE, Viton, Buna-N, or EPR
- Removable 316SS body inserts (stainless steel trim)
- Available in normally-closed configuration from 1/4″ to 3″ FNPT ports
- Available in normally-open configuration from 1/4″ to 1-1/2″ FNPT ports
- Full ported valves
- Normally-closed Cv from 2.7 to 71
- Normally-open Cv from 2.7 to 21
- Class H coils are standard
- Coil housings available in NEMA 1 (standard), NEMA 4 (waterproof), NEMA 7 (explosion-proof for hazardous locations), and combination NEMA 4 & 7
- Manual opening, throttling device or electrical valve position indicator are available as options
Atkomatic 31570 Solenoid Valve Technical Data:
- Description: 2″ FNPT 2-Way/Normally-Closed Semi-Direct Lift Solenoid Valve, constructed in Bronze rated up to 500 psig
- Configuration: 2-Way/Normally-Closed
- Connections: 2″ FNPT
- Coil Type: CLASS H
- Electrical Connection: 1/2″ NPT conduit with 36″ pigtail leads
- Pressure Rating: 500 psig
- Operating Pressures:
- Gas: 0-500 psig
- Water: 0-500 psig (with AC coils) OR 0-350 psig (with DC coils)
- Light Oil: 0-500 psig (with AC coils) OR 0-350 psig (with DC coils)
- Steam: 0-200 psig (with AC coils) OR 0-100 psig (with DC coils)
- Cryogenic: 0-500 psig (with AC coils) OR 0-350 psig (with DC coils)
- Body Material: Bronze
Options:
- Operating Pressure: additional (lower) operating pressure options are available, as shown above in the “How to Order” graphic
- Seat/Pilot/Seal Materials: additional seat/pilot/seal material options are available (such as EPR, PCTFE, metal), as shown above in the “How to Order” graphic
- Valve Modifications:
- Manual Throttling (“T” suffix): allows restriction of flow through the valve by reducing the area of the main valve orifice
- Manual Opening (“M” suffix): allows manual opening of the valve in the even of electrical failure
- Position Indicator (“P” suffix): electrical switches that show both the valve open and closed positions for connection to an external control system
Notes:
- Unless otherwise noted, all Atkomatic solenoid valves are designed for installation in a horizontal pipeline with the coil oriented vertically over the pipe center line.
- It is important to locate filters immediately upstream of the valves (with a maximum micron rating of 40 microns) to prevent contamination in the system from causing functional problems with the valves.
- When selecting the product options, if no results are returned the combination is invalid and other selections will need to be made. For example, Steam and Cryogenic applications require Class H coils and TFE or metal seats because of the temperature requirements.
- Buna-N, Viton and EPR seats are limited to 500 psig.
- Contact the Sales Department for replacement coil part numbers and / or repair kit information.
Please contact our Sales Department for assistance in selecting the right products for your application.
Product Catalog: Atkomatic “30400” Series Solenoid Valves
Product Manual: Atkomatic “30400” Series Normally-Closed Solenoid Valves Manual
Complete Atkomatic Catalog: Atkomatic Solenoid Valves Catalog
Complete Atkomatic Technical Manual: Atkomatic Technical Manual
