Haskel 80523 Oxygen Booster System
NOTE: this system uses a version of the model AGD-1.5 Gas Booster modified for OXYGEN service.
Features & Benefits:
- Plumbed for inert gases in single arrangements
- Supplied with a range of controls: air controls, air pilot switches (optional) for automated stop/start control, relief device, pressure isolation and vent valves
- All components are mounted and plumbed in an open stainless steel frame with a sloped front panel
- Safety relief devices are standard on all gas booster systems for maximum operational safety
- Allows 90 to 95% use of cylinder gas to maintain process pressure when cylinder pressure drops
- Can charge a receiver to even higher pressure level, thus storing a volume of gas for rapid release
Applications:
- Gas accumulator charging
- Pressure & leak testing various pressure containing components
- Pressurization of gas cylinders
- Gas transfer, boosting or mixing
Standard System Components:
- Air-driven gas booster with external pilot modification to enable use of external air pilot switches to automatically start and stop the booster.
- Adjustable inlet air pilot switch used to stop booster when the gas supply pressure falls below the adjusted minimum set point (optional).
- Adjustable remote-set outlet air pilot switch used to stop the booster when the outlet pressure reaches the adjusted maximum set point (optional).
- Outlet pressure gauge, safe case design, 100mm diameter, panel mounted with bar/psi dual scale. Accuracy +/- 1% FSD.
- Inlet pressure gauge, safe case design, 100mm diameter, panel mounted with bar/psi dual scale. Accuracy +/- 1% FSD.
- Gas filter, 5-micron rated, used to stop any ingested contamination from entering the booster (e.g. while changing out gas bottles).
- Roll bar frame with sloping operator panel into which the booster and controls are mounted. Frames are brushed 316 stainless steel.
- Combined air inlet filter/regulator, with integral pressure gauge and on/off control valve. Air filter in-line with 40-micron filtration to maintain air drive quality. Adjustable air regulator used to set the air drive pressure, adjustable between 0-150 psi. 25mm air pressure gauge used to indicate the air drive pressure. Manual on/off valve and speed control valve, panel mounted, used to adjust the cycling speed at which the booster operates.
- Adjustable Haskel relief valve used to protect the booster and other components from over pressurization, piped to a common vent connection.
- Adjustable remote-set air pilot regulator used to change the set point for the remote set outlet air pilot switch (optional).
- 25mm air pressure gauge, panel mounted, used to indicate the adjustable remote set regulator adjusted pressure.
- Manually-operated Butech outlet isolation valve, panel mounted, piped to a common vent connection.
- Manually-operated Butech outlet pressure vent valve, panel mounted, piped to a common vent connection.
- Interstage cooler. A Haskel design integral tube and shell cooler used to reduce the boosted gas temperature.
Technical Data:
- Description: 52618 Oxygen Booster System (type AGD-1.5 booster)
- Drive Size: 5.25″
- Stage 1 Ratio: 1.5:1
- Stage 2 Ratio: N/A
- Min GAS supply pressure: ATM
- Max GAS supply pressure: 300 psi
- Max rated GAS outlet pressure: 300 psi
- Static outlet stall pressure formula: 1.5 Pa + Ps (Pa = air drive pressure; Ps = gas supply pressure)
- Min AIR drive pressure: 20 psi
- Max AIR drive pressure: 130 psi
- Inter-stage relief valve set pressure: N/A
Sample Performance Characteristics:
- Boost 6.2 SCFM Gas from 25 psi to 100 psi while using 30 SCFM Air @ 90 psig supply pressure
- Boost 10 SCFM Gas from 50 psi to 140 psi while using 30 SCFM Air @ 90 psig supply pressure
- Boost 15.1 SCFM Gas from 75 psi to 160 psi while using 30 SCFM Air @ 90 psig supply pressure
Physical Characteristics:
- Displacement / cycle: 60 cu. in.
- Max cycles: 60/min.
- GAS inlet/outlet connections: 3/4″ JIC inlet; 1/2″ JIC outlet
- AIR drive inlet port: 1/2″ FNPT
Haskel 80523 Oxygen Booster System Repair kit information:
- Gas section seal kit P/N: 29635
- Air drive section seal kit P/N: 55226
- Air valve seal kit P/N: 17329
- Check valves seal kit P/N: N/A
- Distance piece kit P/N: N/A
- Optional tools: 28584
- (Sleeve Removal Tool)
- Notes: 29635 Gas Section kit includes piston & check valve seals.
To add any modifications to this booster system or for assistance in selecting the right booster system for your application, please contact our Sales Department.
Product Catalog: Gas Booster Systems Brochure
Product Catalog: Gas Booster Catalog
